![]() |
| Braun Super Paxette (series II) 35mm camera, c1956 |
|
The Braun Super Paxette comes from a well built family of German cameras started around 1951, all share a common casting as their starting point, these were the Paxettes. Later versions of the Paxette, the M series cameras introduced an uncoupled rangefinder. In the Super Paxettes, available from 1956, the rangefinder was coupled to the lens. Super Paxette series I have fixed lenses whilst series II have 39mm screw thread lenses. Robustly made, the Super Paxette is a fairly heavy camera for it's size, but exudes solidity. The main body is a die cast unit with a beautifully pressed brass top housing, so crisp it appears as if machined from solid material, an impression enhanced by the chamfered edges. The Paxette practice of a lever cast into the normal advance knob was retained with the result that the lever needs to be swept twice to both advance the film and cock the shutter. To minimise changes under the top housing the original wind on knob was split in two horizontally, the top half having the lever driving the lower half and returned by a ratchet inserted between the two halves. Access to the film chamber is gained by removing the entire wrap around back, this is held in place by a captive threaded nut surrounding the tripod bush, there is little danger of accidently opening a Super Paxette. The back is a stamped and rolled steel part riveted to a pressed steel satin chromed base. Riveted inside the back is the pressure plate spring and film guide, the pressure plate itself is hinged to the main casting that forms the body. Light proofing is ensured by deep overlaps that do not require any felt. There is no body shutter release, instead it protrudes out of the right hand side of the shutter barrel. Prontor SVS shutters are silky smooth and light in operation and the side release presents no problems. Caution needs to be exercised as being behind the lens, the shutter leaves are exposed inside the back of the camera and are very delicate. A delayed shutter release is fitted and will be found near the bottom, coloured red. This can only be set after the camera has been advanced and the shutter cocked. If the mechanism is not sticky, it will release the shutter after 9-10 seconds. A film counter is fitted and the readout is visible just in front of the accessory shoe, the counter will not self reset and the user must remember to set the counter at the start of the film, be it a 36 or 24 exposure film. The counter counts DOWN, not up. The camera has one shortfall, it will continue winding on after the end of the film as the friction clutch is quite light, so when the counter reaches 0, rewind the film and insert a new one, this gets worse over time. The lens unscrews using the knurled grip behind the depth of field scale ring, a selection of lenses were available from 35mm up to 135mm focal lengths, Braun supplied a universal viewfinder that slipped into the accessory shoe so that the view could be judged with different lenses fitted - this is a rare find these days. Lenses designed for the Paxette II are not compatible with the super Paxette II as the coupling to the rangefinder is not there. This example was acquired in March 2026, and currently requires a deep clean and limited repairs. Well used examples tend to have the shutter speeds erased, as they were printed, not stamped or etched. |
![]() |
|
Body No. 315614 (inside beneath pressure plate) |
|
|
© Living Image Vintage Camera Museum 2000-2026