Vintage and Classic Cameras
Backback button   
Autoknips II (Type 5A), clockwork self timer mechanism, c1950

The Autoknips II is a wind up clockwork self timer of German origin, made by Friedo Wiesenhavern and Heinrich Klapprott. The device had a spectacularly long production life from 1923 until the 1980s. The name is derived from Automatic and the German word for snapshooting "Knipsen". The user would put the camera on a firm position or tripod, assign shutter and aperture values, adjust the plunger saddle to suit their particular camera, wind up the mechanism, set the plunger, screw in the cable release, set mechanism running and position themselves elegantly in the picture, awaiting the device to trip the camera. Unlike the Autoknips I, which ran a parallel lifespan, the Autoknips II allowed for B setting exposures to be made up to ten seconds long. From 1928 both models were supplied in an aluminium case, which will help in dating, prior to this they came in various coloured boxes. The very early examples in 1923 had just three saddle positions, increasing to seven that same year, so finding one with three is quite rare. Seven remained the standard until 1927 increasing to eight until 1931, after which it jumped to ten where it stayed until 1937 then twelve until 1938 and finally sixteen in 1938, where it stayed until the end of the run. The Second World War stalled development until 1950, when it re-emerged largely unchanged from the pre war appearance. The aluminium box was replaced by a plastic box in the mid 1950s. The blue string attached is not some previous owners doing but came as factory standard. The purpose was to hang the timer on some convenient part of the camera so that the weight of the unit wasn't taken by the cable release, which would pull it into a tight radius, potentially jamming operation. A word of caution if tempted to try one, the spring that operates the cable release is rather strong, to the point that it is likely to damage older cotton wrapped cable releases these days, as they will have lost a good deal of their original strength by now. Also it's worth noting that the throat of the saddle doesn't fit modern metal cable releases or vintage metal Kodak examples.

Our example was acquired many moons ago, that is to say we didn't keep a record. It had been displayed in the 1930s cabinet attached to a Zeiss Ikonta 520/2 until an inventory check discovered it was in the wrong era, so now it lives beside a Kodak Retina II, as being one of the few cameras in that cabinet that doesn't have a built in self timer. Therein lies the clue to the demise of these devices, increasingly throughout the 1950s, cameras came equipped with their own timers, rendering the Autoknips and similar, obsolete.

A much more informative German website goes into almost exhaustive and delightful detail here, it's well worth the effort to seek out and translate.

Autoknips II, self timer in its case
Autoknips II, self timer
Condition, 5F    
Go to main navigation page Go to images taken with this camera go to index of all cameras in the web site go to index by era

35mm Film Brand

 

 

© Living Image Vintage Camera Museum 2000-2026